Invertek Drives AC Drives, Drives, Inverters, and Control Systems

	Features

Product Features


	Electrical Data

Data Tables


	Dimensions

Full Dimensions


	Options

Installation

I/O Option

Communication

Data Cables

Configuration & Monitoring


	Software

Optiwand


	Catalogues

Full Catalogue

Datasheet


	Manuals

User Guides

Application Notes

Key Benefits

115V & 220V ratings
Single phase input/ single phase output
Small mechanical envelope
Rugged industrial operation 50°C ambient rating
Simple mechanical & electrical installation
Simple operation, powerful features & easy to use
Fast setup, factory default settings ok for most applications, only 14 basic parameters
Variable torque or constant torque
Unique programmable boost feature to achieve intelligent starting
Motor current and rpm indication
Debugging using troubleshooting & P-00
150% overload for 60 secs (175% for 2 secs)
Keypad control
Integral RFI filter option
Integral brake chopper (S2 only)
Modbus RTU serial communications

SPECIAL BOOST PHASE OPERATION

To ensure reliable starting, the Optidrive E2 initially ramps the motor voltage up to rated frequency and voltage, before reducing the frequency and voltage to the desired operating point, see diagrams below.

Specification

Output ratings	Overload Capacity	150% for 60 secs 175% for 2 secs
	Frequency	0…120Hz
Input Ratings	Frequency	48 - 62Hz
	Voltage	110 - 115 + / - 10% 1 Phase ( 0.5 - 1.5HP) 200 - 240 + / - 10% 1 Phase (0.37 - 2.2kW / 0.5 - 3HP)
Ambient Conditions	Temperature	Operating : 0 to 50°C Max; Storage : -40 to +60°C
	Altitude	0 - 2000m, derate 1% per 100m above 1000m
	Ingress Protection	IP20; Optional IP55/NEMA 12 & IP66/NEMA 4X
Programming	Keypad	Yes
	PDA	Yes
	Smartphone	Yes
Control Specification	Control Method	VF
	V/Hz ratio	Linear
	Boost	Automatic Boost Phase Operation
	Stop Mode	Coast / Ramp / DC Brake
	Internal Brake transistor	Yes (Sizes 2 only). External Resistor required
	Capacity	100% Drive Rated Power continuously
	Frequency setpoint control	0…10 VDC 0…24 VDC 4…20mA 0..20mA Digital - Keypad Modbus
	Pre-set speeds	4
	PI Control	Yes
	Spin Start	Yes
	Acceleration	0..600 sec
	Deceleration	(2 ramps) 0..600 sec
	PC Setup Software	Optistore V3
Programmable I/O	Input 1	Programmable Digital Input
	Input 2 / Output 2	User Selectable Digital Input / Output
	Input 3	User Selectable Analog / Digital Input
	Input 4	User Selectable Analog / Digital Input
	Output 1	Programmable Analog / Digital Output
	Relay 1	Relay Output (30 VDC 5A, 250 VAC, 6A)
Keypad Display	Operating Display	Output Frequency, Current, RPM, Power and User Scalable values
	Remote mount	Optional Optiport E2 remote mounting keypad
Protective Functions	Inverter Trip	Over voltage Over current Under voltage External trip Motor overload Over temperature Short circuited Earth Fault Under Voltage
	Memory	Last 4 Trips stored
Bus communication	Modbus RTU	Standard
	Profibus DP	via Gateway
	DeviceNet	via Gateway
	RS485 (Optibus)	Standard

www.invertek.co.uk - AC Drives, Drives, Inverters and Control Systems

T: +44 (0) 1938 55 68 68 - F: +44 (0) 1938 55 68 69 - E: sales@invertek.co.uk