Input Ratings |
Supply Voltage |
230V: 200 – 240V ± 10%
400V: 380 – 480V ± 10% |
|
Supply Frequency |
48 – 62Hz |
|
Phase Imbalance |
3% maximum |
|
Inrush Current |
< rated current |
|
Power Cycles |
120/hour max, evenly spaced |
Output Ratings |
Output Power |
230V 1 Phase Input: 0.75 – 2.2kW
230V 3 Phase Input: 0.75 – 90kW
400V 3 Phase Input: 0.75 – 160kW |
|
Overload Capacity |
150% for 60 seconds, 200% for 2 seconds |
|
Output Frequency |
Up to 500Hz |
Ambient Conditions |
Temperature |
Storage:
40 to 60°C
IP20 Operating:
10 to 50°C at default switching frequency
(60°C max possible with derating)
IP55 and (optional) IP66 Operating:
10 to 40°C at default switching frequency
(50°C max possible with derating) |
|
Altitude |
1000m with no derating
(derate 1%/100m above 1000m)
2000m max UL Approved
4000m max without UL Approval |
|
Humidity |
95% max, non-condensing |
Enclosure |
Ingress protection |
Size 2 & 3: IP20 standard, IP66 optional
Size 4, 5, 6 & 7: IP55 standard |
Programming |
Keypad |
Yes |
|
PC |
Yes |
|
Preset speeds |
8 user adjustable |
|
PID control |
Internal |
|
Spin start |
Yes |
|
Acceleration |
0 – 3000 secs, 0.1 resolution |
|
Deceleration |
1st Ramp: 0 – 3000 secs, 0.1 resolution
2nd Ramp: 0 – 30 secs, 0.1 resolution |
Performance |
Speed regulation |
Open Loop: ± 20% of motor slip
Open Loop Vector:
Better than ± 0.5% of motor speed
Closed Loop Vector:
Better than ± 0.1% of motor speed |
|
Torque control |
0 – 200% of motor rated torque |
Control Specification |
Control method |
V/F Voltage Vector
Energy Optimiser V/F
Permanent Magnet Encoderless
Sensorless Vector Speed Control
Sensorless Vector Torque Control
Closed Loop (encoder) Vector Speed
Closed Loop (encoder) Vector Torque
Closed Loop PM |
|
Stopping mode |
Coast Stop
Ramp to Stop
DC Injection
Dynamic Braking with external resistor |
|
Skip frequency |
Single point, user adjustable |
|
Setpoint control
(internal) |
0 – 10V
10 – 10V
0 – 20mA
20 – 0mA
4 – 20mA
20 – 4mA
Master/Slave (Optibus)
Modbus RTU
CANbus |
|
Setpoint control
(optional) |
PROFIBUS
DeviceNet
EtherNet |
I/O Specification |
Digital inputs |
10 – 30V DC, internal or external supply, NPN
Response time < 4ms |
|
Power supply |
24V DC, 100mA, Short Circuit protected
10V DC, 10mA for Potentiometer |
|
Analog inputs |
;10 – 10V DC
0/4 – 20mA
0/24V, 30V DC max
Resolution: 12 bits + sign
Response time < 4ms
Accuracy: Better than 1% of full scale
Parameter adjustable Scaling and Offset |
|
Analog outputs |
0 – 10V
0/4 – 20mA |
|
Relay outputs |
Maximum Voltage : 250V AC, 30V DC
Switching Current : 6A AC, 5A DC |