| Application | Description | Last Updated | Download |
| AN-ODP-00 |
All application notes
| 23/04/09 |
|
| AN-ODP-01 |
Setting up the motor nameplate data
| 23/04/09 |
|
| AN-ODP-02 |
Setting up the acceleration and deceleration ramp times
| 23/04/09 |
|
| AN-ODP-03 |
Selecting the required stop mode
| 23/04/09 |
|
| AN-ODP-04 |
Locking parameters to prevent unauthorised changes
| 23/04/09 |
|
| AN-ODP-05 |
Displaying motor speed In RPM
| 23/04/09 |
|
| AN-ODP-06 |
Configuring voltage and current reference inputs
| 23/04/09 |
|
| AN-ODP-07 |
Using skip frequency
| 23/04/09 |
|
| AN-ODP-08 |
Selecting the required start / restart mode
| 23/04/09 |
|
| AN-ODP-09 |
Programming the output relay
| 23/04/09 |
|
| AN-ODP-10 |
Using the second relay output option module
| 23/04/09 |
|
| AN-ODP-11 |
Using the scaling factor to change the display value
| 23/04/09 |
|
| AN-ODP-12 |
Using standby mode to save energy
| 23/04/09 |
|
| AN-ODP-13 |
How to use the zero speed holding function
| 23/04/09 |
|
| AN-ODP-14 |
Switching from terminal to keypad control via digital inputs
| 23/04/09 |
|
| AN-ODP-15 |
Changing the V/F characteristic in V/F control mode
| 23/04/09 |
|
| AN-ODP-17 |
How to enable and use the braking circuit
| 23/04/09 |
|
| AN-ODP-18 |
Torque control using the Optidrive Plus
| 23/04/09 |
|
| AN-ODP-19 |
Using variable torque limits in speed control mode
| 23/04/09 |
|
| AN-ODP-20 |
Configuring the drive for 3 digital output signals
| 23/04/09 |
|
| AN-ODP-21 |
Using the Optidrive Plus with 4 preset speeds
| 23/04/09 |
|
| AN-ODP-22 |
Using the Optidrive Plus with 8 preset speeds
| 23/04/09 |
|
| AN-ODP-23 |
Using the Optidrive Plus with 6 preset speeds
| 23/04/09 |
|
| AN-ODP-24 |
Energy optimisation function for fan/pump applications
| 23/04/09 |
|
| AN-ODP-25 |
Configuring the drive for remote push-button speed control
| 23/04/09 |
|
| AN-ODP-26 |
Remote Keypad control with Auto run
| 23/04/09 |
|
| AN-ODP-27 |
Master slave network operation
| 23/04/09 |
|
| AN-ODP-28 |
Upgrading the User Interface software using a PDA
| 01/06/09 |
|
| AN-ODP-30 |
Using second deceleration ramp time
| 23/04/09 |
|
| AN-ODP-31 |
Setting up the speed controller for vector speed control
| 23/04/09 |
|
| AN-ODP-32 |
PID control using Parameter group 3
| 23/04/09 |
|
| AN-ODP-33 |
Motor parameter auto-tune
| 23/04/09 |
|
| AN-ODP-34 |
Configuring the Optidrive Plus for hoist applications
| 23/04/09 |
|
| AN-ODP-35 |
Hi speed spindle applications
| 23/04/09 |
|
| AN-ODP-36 |
Load sharing using cascade control
| 23/04/09 |
|
| AN-ODP-37 |
Braking resistor sizing for braking applications
| 23/04/09 |
|
| AN-ODP-38 |
3GV-M Modbus RTU Register Map
| 23/04/09 |
|
| AN-ODP-39 |
Using the Speed Droop Function for load sharing
| 23/04/09 |
|
| AN-ODP-40 |
Achieve positive and negative speed with a 0-10V input
| 23/04/09 |
|
| AN-ODP-41 |
Using the bipolar analog input for current input signals
| 23/04/09 |
|
| AN-ODP-42 |
Motor power factor reference table
| 23/04/09 |
|
| AN-ODP-43 |
Local-remote control with Modbus
| 23/04/09 |
|
| AN-ODP-44 |
Speed dependant variable torque limits
| 23/04/09 |
|
| AN-ODP-45 |
Connecting multiple motors in parallel
| 23/04/09 |
|
| AN-ODP-46 |
Bipolar speed control with single potentiometer
| 23/04/09 |
|
| AN-ODP-47 |
Closed loop speed control
| 23/04/09 |
|