Invertek Drives AC Drives, Drives, Inverters, and Control Systems

	Features

Product Features


	Electrical Data

Data Tables


	Dimensions

Full Dimensions


	Options

Installation

I/O Option

Communication

Data Cables

Configuration & Monitoring


	Software

Optiwand

Optistore V3


	Catalogues

Full Catalogue

Datasheet


	Manuals

User Guides

Application Notes

OPTIDRIVE PLUS 3GV 3GV Technology combines full torque at 0.0Hz.AC Variable Speed Drive 0.37-160kW

Key Benefits

Compact Design for reduced panel space requirements
Easy Key Mounting Slots giving fast and easy installation
Pluggable Control Terminals enable simple, easy access control wiring
Up to 50°C Ambient Temperature, rugged design for harsh environments
Internal RFI Filter for compliance with the latest EMC standards
14 Basic Parameters allow fast commission with powerful yet simple features
High Visibility LED Display with user scaling, easy to read
32kHz Output Switching Frequency for ultra quiet motor operation
150% Overload for 60 Seconds (175% for 2 seconds), high starting capacity for demanding applications
Mains dip ride through allows continuous operation through short periods of supply loss
Built in Master – Slave control function with fast set up and selectable scaling
Built in Infra Red programming port requires no cables

Specification

Output ratings	Overload Capacity	150% for 60 secs 175% for 2 secs
	Frequency	0…500Hz
Input Ratings	Frequency	48 - 62Hz
	Voltage	200 - 240 + / - 10% 1 Phase (0.37 - 22kW / 0.5 - 30HP) 200 - 240 + / - 10% 3 Phase (1.5 - 90kW / 2 - 120HP) 380 - 480 + / - 10% 1 Phase (0.75 - 90kW / 1 - 105HP) 380 - 480 + / - 10% 3 Phase (1.5 - 160kW / 2 - 210HP) 480 - 525 + / - 10% 3 Phase (55 - 200kW) 500 - 600 + / - 10% 3 Phase (1.5 - 45kW / 2 - 60HP)
Ambient Conditions	Temperature	Operating : -10 to 50°C Max; Storage : -40 to +60°C
	Altitude	0 - 2000m, derate 5% per 100m above 1000m
	Ingress Protection	IP20, Optional IP55
Programming	Keypad	Yes
	PC	Yes
	PDA	Yes
Control Specification	Control Method	V / F 3GV Sensorless Vector Closed Loop Vector (with optional encoder feedback interface)
	PWM Frequency	4…32kHz (effective)
	V/Hz ratio	Linear (1 adjustment point)
	Boost	Automatic after autotune
	Stop Mode	Coast / Ramp / DC Brake
	Internal Brake transistor	Yes (Size 2 - 6). External Resistor required
	Capacity	100% Drive Rated Power continuously
	Skip Frequency	One point, adjustable frequency band
	Frequency setpoint control	0…10 VDC +/- 10 VDC 0…24 VDC 4…20mA 0..20mA Digital - Keypad RS485 (Master Slave) Modbus
	Pre-set speeds	8
	PID Control	Yes
	Spin Start	Yes
	Acceleration	0..3000 sec
	Deceleration	(2 ramps) 0..3000 sec
	S Curve Accel/Decel	Firmware Download Available
	PC Setup Software	Optistore V3
Programmable I/O	Input 1	Programmable Digital Input
	Input 2 / Output 2	User Selectable Digital Input / Ouptut
	Input 3	User Selectable Unipolar Analog / Digital Input
	Input 4	User Selectable Bipolar Analog / Digital Input
	Output 1	Programmable Analog / Digital Output
	Relay 1	Relay Output (30 VDC 5A, 250 VAC, 6A)
Keypad Display	Operating Display	Output Frequency, Current, RPM, Power and User Scalable values
	Remote mount	Optional Optiport Plus remote mounting keypad
Motor feedback	Feedback type	With Encoder Module - HTL or TTL
	Pulses/Rev	Adjustable
	Max Frequency	500kHz
Protective Functions	Inverter Trip	Over voltage Over current Under voltage External trip Motor overload Over temperature Short circuited Earth Fault Under Voltage
	Memory	Last 4 Trips stored
Bus communication	Modbus RTU	Standard
	Profibus DP	via Gateway
	DeviceNet	via Gateway
	RS485 (Optibus)	Standard
Compliance with Standards	EN 61800-3:2004	Adjustable speed electrical power drive systems. EMC requirements
Additional Features		Built in Master - Slave Operation Mode PID 'Sleep' Mode Energy Optimising Function

www.invertek.co.uk - AC Drives, Drives, Inverters and Control Systems

T: +44 (0) 1938 55 68 68 - F: +44 (0) 1938 55 68 69 - E: sales@invertek.co.uk